Handle the mainboard carefully by the edges. Unten stehend finden Sie eine Liste mit den Chipsatzteilen und deren jeweiligen Funktionen: You can purchase your own optional accessories from the third party, but please contact your local vendor on any issues of the specification and compatibility. Insert the CPU into the socket. Locate the infrared port IR1 connector on the mainboard.

Uploader: Moogusida
Date Added: 14 November 2006
File Size: 10.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 9476
Price: Free* [*Free Regsitration Required]

Install each software in accordance with the corresponding driver path. Audio Ports Use the three audio ports to connect audio devices.

pcchips M935DLU (V2.0) Audio דרייבר הורדה בחינם (ver. 1.­09)

Pull the locking lever away from the socket and raising it to the upright position. Use LPT1 to connect printers or other parallel communications devices. Auio your drives and connect power from the system power supply. Any jumpers on your mainboard not appearing in the illustration above are for testing only. A software menu appears.

If you enable this item, your system will check all floppy disk drives at start up.


Mainboard Components Use the diagram below to identify the major components on the mainboard. Modify Old Values Shift F2: You can install this mainboard in an ATX case. Further, the manufacturer reserves the right to revise this publication and to make changes from time to time in the audoi hereof without obligation of the manufacturer to notify any person of such revision or changes.


During installation, wear a grounded wrist strap if possible. These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components. The information in this document is subject to change without notice.

SelfMonitoring, Analysis and Reporting Technology feature. You can purchase your own optional accessories from the third party, but please contact your local vendor on any issues of the specification and compatibility.


Locate the infrared port IR1 connector on the mainboard. The Browse CD button is a standard Windows command that you can check the contents of the disc with the Windows 98 file browsing interface.

You might need to do this to configure some of the hardware j935dlu you install on or connect to the mainboard, such as the CPU, system memory, disk drives, etc. Ensure the edge connector is correctly seated in the slot. Features Setup Page This page sets some of the parameters for peripheral devices connected to the system. Therefore, it might happen under Windows XP that a dialogue box shown as below pop out warning you this software has not passed Windows Logo testing to verify its compatibility with Windows XP.

PC Chips M935DLU (V2.0) Audio Driver

Leave these items enabled since all the processors that can be installed on this board have internal L2 cache memory. The options are m935du, 1 and 3. The Setup button runs the software auto-installing program as explained in next section. Keep the mainboard and other components in their original static-proof packaging until you are ready to install them.


Match the pin1 corner the beveled edge on the M935dpu with the pin1 corner on the socket shown as the above illustration. The documentation of the IDE device will tell you how to configure the device as a Master or Slave device. If you connect a USB 2. Please see the following illustration. Push the locking lever down and hook it under the latch on the edge of socket.

Remove the blanking plate of the slot from the system chassis. Press Enter after you have retyped it correctly. If you enable this item, the system can automatically resume if there is an incoming call on the Modem.

When choosing a processor, consider the performance requirements of the system. Other names used in this publication may be trademarks and are acknowledged.