Main Menu The main menu includes five submenus. Direct Link Setup Enable: Please select which ACs you want to enable. Infrastructure — This operation mode requires the presence of a wireless Access Point. Please wait for a while during the adapter is configuring your new software installation. The result will look like the below figure. Remove Remove the selected profile.

Uploader: Kiganris
Date Added: 11 June 2015
File Size: 69.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 20459
Price: Free* [*Free Regsitration Required]

Or you can choose Optimize for WiFi mode to run advanrek standard wireless network. A statistic analysis of qireless transition is listed. The application version and license information are shown in the about dialog. Select Make the desired network connection to public network.

Wireless Lan Utility 3. Setup the same key as the wireless device that the adapter intends to connect. When the protection mode is enabled, the throughput of the adapter will be a little lower due to many of frame traffic should be transmitted.

Otherwise, please contact your vendor.

It limits the channel measurement time. There are two modes including Auto, Long and Short Preamble. Wireless Network Neetworks Utility The Configuration Utility is a powerful application that helps you to configure the Wireless LAN adapter and monitor the link status and statistics during the communication process.

It is also included in IEEE Click Install begin the installation.


Submit complete detailed information of your problem will help us to provide you accurate answers. User should be aware that while the wireless configuration is in AP mode. Higher threshold will increase data transfer rate and better performance with good signal quality. When this parameter is enabled, the Cisco AP can run the radio monitoring through the associated CCX-compliant clients to continuously monitor the WLAN radio environment and discover and new APs that are transmitting beacons.

Advantek Networks AWN-USB-11N2 User Manual

This setting has to be consistent with the wireless networks that the adapter intends to connect. After the setup has finished the installing and click Finish button. Please wait for a while during the Setup Wizard is preparing the setup. The TCP Window is the amount of data a sender can send on a particular connection before it gets an acknowledgment back from the receiver that it has gotten some of it.

Please wait for a while during the adapter is configuring your new software installation. Direct Link Setup Enable: While the radio is off, the links with other wireless network will be disconnected.

No part of this document can be copied or reproduced in any form without written consent from the company. Get a better Internet experience with a faster wireless connection so you can enjoy smoother digital phone calls, gaming, downloading, and video streaming.


Troubleshooting This chapter provides solutions to problems usually encountered during adaper installation and operation of the adapter. Turn on the computer. If not, management GUI will shut down while clicking “Close” button with unchecked condition Radio Off Turn off the radio to save power. The product supports the following IEEE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.

If you want to connect to any networks on the list, double-click the item on the list, and the card will automatically connect to the selected network.

Advantek Networks (USB ) User`s manual |

Click Install Driver to begin device driver installation. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

To print the manual completely, please, download it. The following installation was operated under Windows XP.